Menu
Search

CONE BOTTOM TANKS

cone bottom tanks

FEATURES

  • Available in 30°, 45°, and 60° slopes, sizes range from 15-13,000 gallons.
  • Material options for a diverse range of application requirements.
  • High-density linear polyethylene (HDLPE)*- black and natural white color - complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
  • Cross-linked, high density polyethylene (XLPE) - black and natural white color.
  • Most tanks available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems.
  • Specific gravity ratings are based on the industry's most severe calculation.
  • Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request.
  • All materials are UV stabilized for long-term outdoor service.
  • Maximum operating temperature recommended for Cone Bottom tanks is 100 degrees F.

SPECIFICATIONS

NOTE: Dimensions listed below and on drawings may vary +/- 3% (standard Molding tolerance). Tank dimensions may vary depending on manufacturing location - please contact factory for drawing specific to the F.O.B. location. Specifications Subject to Change Without Notice.

part number description capacity (gal) cone slope (deg) diameter (in) height w/ stand (in) f.o.b.
1520000N-- Cone Bottom Open Top w/ Cover 15 45 17 38 L
1520001N-- Cone Bottom Open Top w/ Cover - No Sump 15 45 17 38 L
1850000N-- Cone Bottom 17 60 19 34 L
32223 Cone Bottom 30 30 27 42 S X L
1580000N-- Cone Bottom 35 30 30 34 L
32419 Cone Bottom 60 30 30 51 S X L
1560000N-- Cone Bottom 65 30 30 41 L
32468 Cone Bottom (no stand available) 85 30 30 39 S
6070000N-- Cone Bottom 110 30 30 56 L
32053 Cone Bottom (no stand available) 110 45 30 50 S
32101 Cone Bottom 150 45 36 50 S X L
1560400N-- Cone Bottom w/ Poly Stand 225 30 48 54 S
1560500N-- Cone Bottom w/ Poly Stand 325 30 48 66 S
6190000N-- Cone Bottom 500 45 64 80 L
1890000N-- Cone Bottom 1000 30 86 81 L
1890000N-- Cone Bottom w/ Poly Stand 1000 30 86 77 C
5000000N-- Cone Bottom 1000 45 64 120 L
1900000N-- Cone Bottom 1400 30 86 94 L
1900000N-- Cone Bottom w/ Poly Stand 1400 30 86 90 C
5010000N-- Cone Bottom 1500 45 64 158 L
1910000N-- Cone Bottom 1650 30 86 110 L
1910000N-- Cone Bottom w/ Poly Stand 1650 30 86 106 C
5070000N-- Cone Bottom 2000 30 90 125 L
5110000N-- Cone Bottom 2500 30 90 148 L
8350000N-- Cone Bottom 2500 30 95 125 C
5100000N-- Cone Bottom 2600 45 90 160 L
5150000N-- Cone Bottom 3000 30 90 167 L
8360000N-- Cone Bottom 3000 30 95 144 C
8050000N-- Cone Bottom 3600 15 102 135 M
5440000N-- Cone Bottom 3900 30 90 203 L
5180000N-- Cone Bottom 4100 45 90 216 L
5200000N-- Cone Bottom 4400 30 90 222 L
8050100N-- Cone Bottom 4600 15 102 164 M
8050200N-- Cone Bottom 5000 15 102 176 M
7040000N-- Cone Bottom 5500 30 90 255 L
5280200N-- Cone Bottom 6000 30 142 159 L
7180000N-- Cone Bottom 6500 30 90 296 L
5320100N-- Cone Bottom 7400 30 142 179 L
5340100N-- Cone Bottom 11,500 30 142 238 L
7490100N-- Cone Bottom 13,000 30 142 260 L

SMALL CONE TANK STANDS

part number description
48900 15 Cone Stand
48400 17 Cone Stand
48600 35, 65, 110 Cone Stands
63932 150 Cone Stand

STEEL CONE TANK STANDS

NOTE: All steel stands are powder coated or painted black. Seismic stands must be ordered if siesmic restraints are required. If no siesmic tie down system is required, standard stand can be used. Seismic systems are not available for 95" and 102" diameter Cone Tanks, 5500 & 6500 gallon 90" diameter Cone Tanks and Tanks with polyethylene stands.

standard part number siesmic part number cone slope (deg) tank diameter (in) recommended tank capacity (in)
1003000C97801 N/A 30 86 1000, 1400, 1650 (FOB C only)
79000000 79000000 30 86 500, 1000 (FOB L only)
79000000 78900000 30 86 1400, 1650 (FOB L only)
79300000 79300000 30 90 2000, 2500, 3000
79300000 79800000 30 90 3900 - 4400
79300000 N/A 30 90 5500, 6500
78401000 N/A 30 95 1250, 1600, 2500, 3000
48500000 N/A 15 102 3600, 4600, 5000
79500000 79500000 30 142 6000, 7400
79500000 79500100 30 142 11,500, 13,000
78800000 78800000 45 64 500, 1000, 1500 (1.6 SG)
78800000 78801000 45 64 1500 (1.6 SG)
79400000 79400000 45 90 2600
79400000 79900000 45 90 4100

TOTAL DRAIN TANKS

NOTE: * High-density linear polyethylene (HDLPE) - black and natural white colors. These tanks must be ordered with the plastic stands listed directly below - no exceptions. Drawings shown with 12" stands but are available with either 12" or 18" stands, except for the 850 which is available with the 12" stand only. All Total Drain tanks above are rated for 1.9 Specific Gravity except the 550 gallon size is limited to 1.7 Specific Gravity, and the 850 gallon size is limited to 1.1 Specific Gravity.

part number capacity (gal) cone slope (deg) nominal diameter (in) nominal height (in) f.o.b.
1800501N45 * 550 10 - 15 48 82 M
1810301N45 * 850 10 - 15 48 126 M
5680001N45 60 10 - 15 22 42 M
5690101N45 90 10 - 15 30 43 M
5700101N45 120 10 - 15 30 54 M
5710101N45 150 10 - 15 30 64 M
5720101N45 200 10 - 15 36 60 M
5730101N45 250 10 - 15 36 72 M
5740101N45 275 10 - 15 42 63 M
5750101N45 330 10 - 15 42 72 M
5760101N45 360 10 - 15 48 64 M
5770101N45 440 10 - 15 48 74 M
5780101N45 500 10 - 15 48 82 M

PLASTIC STANDS

NOTE: Tanks available in 1.5, and 1.9 Specific Gravity in HDLPE and XLPE materials. Contact factory for availability.

part number nominal diameter (in) nominal bottom clearance (in) f.o.b.
1370000N-- 22 22 M
1370001N-- 22 18 M
1690000N-- 30 12 M
1690001N-- 30 18 M
1730000N-- 36 12 M
1730001N-- 36 18 M
1750000N-- 42 12 M
1750001N-- 42 18 M
1760000N-- 48 12 M
1760001N-- 48 18 M

LET'S GET IN TOUCH

Have a question or not sure which solution fits your needs?

Call Us

1 888 422 8683

Email Us

sales@honornm.com
FIND A DEALER OR SALESPERSON

Corporate Headquarters
6940 O Street, Suite 100
Lincoln, Nebraska 68510
Phone: 402-467-5221
Fax: 402-465-1220

QUICK LINKS
RESOURCES
SHOP

Browse and buy our selection of plastic bins, containers, pallets, tanks, accessories and more!

SHOP.SNYDERNET.COM

Copyright 2024 by Snyder Industries